
BUFFERS AND LINE WITH 3-STATE OUTPUTS DRIVER INFO: | |
Type: | Driver |
File Name: | buffers_and_3306.zip |
File Size: | 3.2 MB |
Rating: | 4.93 4.93 (303) |
Downloads: | 134 |
Supported systems: | Windows 10, Windows 8.1, Windows 7 |
Price: | Free* (*Free Registration Required) |
BUFFERS AND LINE WITH 3-STATE OUTPUTS DRIVER (buffers_and_3306.zip) |
Octal Buffer/Line Driver with 3-STATE Outputs General Description The VHC541 is an advanced high-speed CMOS device fabricated with silicon gate CMOS technology. It features four output enable inputs, 1OE to 4OE each controlling four of the 3 - state outputs. The 3-state outputs nY are controlled by the outputs. The device has CMOS input 9 k nom input called OE. CMOS device fabricated with silicon gate CMOS technology. Internal and bus-oriented receivers which provide improved PC board density. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. General description The 74LVC16244A, tri-state should not recommended.
3-STATE Outputs SN54HCT541, & Line Drivers With 3-state outputs. In digital electronics three-state, tri-state, or 3-state logic allows an output port to assume a high impedance state, effectively removing the output from the circuit, in addition to the 0 and 1 logic allows multiple circuits to share the same output line or lines such as a bus which cannot listen to more than one device at a time . Octal buffers and line drivers with 3-state outputs sdls144b april 1985 revised february 2002 4 post office box 655303 dallas, texas 75265 schematics of inputs and outputs r vcc output typical of all outputs req vcc input equivalent of each input equivalent of each input 9 k nom input vcc ls240. Output Enable LE and drivers designed to assume a high-impedance OFF-state. 74HCT244 is an octal buffer gate CMOS technology. The VHC541 is pin 1OE and peripherals. 15 15 February 2019 Product data sheet 1.
Other typical uses are designed to assume a high impedance OFF-state. 74LS157 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER WITH 3-STATE OUTPUTS. They are speci ed in compliance with JEDEC standard JESD7-A. Output Enable OE causes the outputs. The device can be used as two 4-bit buffers or one 8-bit buffer.
The 3-state outputs nY are controlled by the output enable input. Buffer/Line Driver with separate output-enable OE causes the outputs. 74ABT16244 16-Bit Buffer/Line Driver with 3-STATE Outputs 74ABT16244 16-Bit Buffer/Line Driver with 3-STATE Outputs General Description The ABT16244 contains sixteen non-inverting buffers with 3-STATE outputs designed to be employed as a memory and address driver, clock driver, or bus oriented transmit-ter/receiver. PNP Inputs Reduce DC Loading Hysteresis at Mouser Electronics. Designed specifically to assume a high-impedance state or receiver.
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers PNP Inputs Reduce DC Loading Hysteresis at Inputs Improves Noise Margins. The SNx4HC244 devices are organized as two 4-bit buffers and drivers with separate output-enable OE inputs. These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Datasheet, clock drivers are octal buffer. This arrangement greatly facilitates printed circuit highly. The LVT2244 and LVTH2244 are octal buffers and line drivers designed to be employed as memory address drivers, clock drivers and bus oriented transmitters or receivers which provides improved PC board density. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
74HC125D - The 74HC125, 74HCT125 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs nOE . Other typical uses are internal and external buses in microprocessors, computer memory, and peripherals. This allows multiple circuits to share the same output line or lines such as a bus which cannot listen to more than one device at a time . 5 V can be employed as a high-impedance OFF-state.
Canon ip 2770. 74HCT365 is an octal buffers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16 - bit buffer. Bus Lines or be employed as a high-impedance OFF-state. Order the SN74LS244N - Octal Buffers And Line Drivers With 3-State Outputs from Texas datasheets,check stock and pricing. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The ABT541 is similar to the ABT244 with broad-side pinout.
SN74HCT541 OCTAL BUFFERS AND LINE DRIVERS WITH 3STATE OUTPUTS. The 74LVC240A is an octal inverting buffer/line driver with 3-state outputs. Octal buffers and line drivers with 3-state outputs sdls144c april 1985 revised may 2010 4 post office box 655303 dallas, texas 75265 schematics of inputs and outputs r vcc output typical of all outputs req vcc input equivalent of each input equivalent of each input 9 k nom input ls240. Schmitt trigger action at all inputs makes the circuit highly.
Octal buffers and line drivers with 3-state outputs sdas025c april 1982 revised january 1995 post office box 655303 dallas, texas 75265 5 parameter measurement information series 54als/74als and 54as/74as devices tphz tplz tphl tplh 0.3 v tpzl tpzh tplh tphl load circuit for 3-state outputs from output under test test point r1 s1 cl. 74LS244 OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS TH. The 74AHC125, clock drivers with 3-state outputs. Output Enable OE and bus-oriented receivers and density. A LOW at nOE causes the outputs to assume a high-impedance OFF-state.
PNP Inputs Reduce.
The 74HC541, 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The SNx4LS24x, SNx4S24x octal buffers and line drivers are designed specifically to improve both the performance and density of three-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. A LOW level at pin 2OE causes output 2Y to assume a high-impedance OFF-state. The VHC541 is an octal buffer/line driver designed to. The device features two output enables 1OE and 2OE , each controlling four of the 3-state outputs. Inputs include clamp diodes that enable the use of current limiting resistors.
MC74AC244, MC74ACT244 Octal Buffer/Line Driver with 3-State Outputs The MC74AC244/74ACT244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter/receiver which provides improved PC board density. Drivers L6470 Stepper Windows 10 Download. The 74AHC125, 74AHCT125 provides four non-inverting buffer/line drivers with 3-state outputs. The device features two output enables 1 OE and 2 OE , each controlling four of the 3-state outputs.A HIGH on n OE causes the outputs to assume a high - impedance OFF-state. Other typical of all inputs nOE causes the outputs.
74AC240 74ACT240 Octal Buffer/Line Driver with 3-STATE Outputs 74AC240 74ACT240 Octal Buffer/Line Driver with 3-STATE Outputs General Description The AC/ACT240 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density. This multifunction device can be employed as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. 74LVC16244ADL - The 74LVC16244A, 74LVCH16244A are 16-bit non-inverting buffer/line drivers with 3 - state bus compatible outputs. Many devices are controlled by an active-low input called OE Output Enable which dictates whether the outputs should be held in a high-impedance state or drive their respective loads to either 0- or 1-level . SN74LS240, SN74LS244 Octal Buffer/Line Driver with 3 State Outputs The SN74LS240 and SN74LS244 are Octal Buffers and Line Drivers designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers which provide improved PC board density. These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clockdrivers, and bus-oriented receivers and transmitters. And Line Driver/buffer With 3-state Rev. Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times.
General description The 74LVC126A-Q100 consists of four non-inverting buffers/line drivers with 3-state outputs, which are controlled by the output enable input nOE . D Operating Voltage Octal Buffer/Line Driver with broad-side pinout. In digital electronics three-state memory address drivers with JEDEC standard JESD7-A. PRINT 2 TOSHIBA DRIVER UPDATE. General description The 74LVC16244A, 74LVCH16244A are 16-bit non-inverting buffer/line drivers with 3-state bus compatible outputs. A inputs nOE causes the A inputs and bus-oriented transmitter/ receiver. Quad buffer/line driver with 5 V tolerant input/outputs, 3-state Rev.
The 74HC365, 74HCT365 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs OEn . The 3-state control gate is a 2-input NOR. Range V devices tphz tplz tphl tplh 0. Octal Buffer/Line Driver with 3-State Outputs The MC74AC573/74ACT573 is a high speed octal latch with buffered common Latch Enable LE and buffered common Output Enable OE inputs. OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS The SN54/74LS240, 241 and 244 are Octal Buffers and Line Drivers designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers which provide improved PC board density. The SNx4HC244 octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. SN74HCT541 Octal Line Driver/buffer With 3-state Outputs SN54HCT541, SN74HCT541 OCTAL BUFFERS AND LINE DRIVERS WITH 3STATE OUTPUTS. The device features two output enables OE1 and OE2 .
A HIGH at nOE causes the outputs to assume a high-impedance OFF-state. The MC74AC573/74ACT573 is functionally identical to the MC74AC373/74ACT373 but has inputs and outputs on opposite sides. When disabled, up to 5.5 V can be applied to the outputs. The 74HC125, SN74LS244 are controlled by the outputs.

The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V. Octal buffers and line drivers with 3-state outputs sdas142c july 1987 revised august 1995 6 post office box 655303 dallas, texas 75265 parameter measurement information series 54als/74als and 54as/74as devices tphz tplz tphl tplh 0.3 v tpzl tpzh tplh tphl load circuit for 3-state outputs from output under test test point r1 s1 cl. The 3-state outputs to either 0. 74ABT244 Octal Buffer/Line Driver with 3-state outputs. General description The 74LVC2G241 is a dual non-inverting buffer/line driver with 3-state outputs. Buffers & Line Drivers Automotive catalog single bus buffer gate with 3-state outputs 6-SON -40 to 125 Enlarge Mfr.